Flysmart Digi

iFlight SucceX-D F7 V2.1 Stack (F7+50A ESC)

數量

簡介

+ PRODUCT DESCRIPTION The SucceX-D F7 V2.1 is designed to work seamlessly with DJI’s new HD FPV system. To make things even simpler, the DJI Air unit can just be plugged into the FC with the included wire harness. In addition, we added the popular and reliable USB Type-C instead of Micro USB and therefore the same standard than your DJI module. Features • Universal USB Type C connector instead of micro USB • Plug-and-Play. No need to solder tiny wires.) • Supports BLHeli pass-through for easy ESC upgrade and configuration. • Designed to support DJI Digital FPV. FC // SucceX-D F7 V2.1 TwinG MCU: 216MHz STM32F722 Gyro：2x ICM20689 Baro: YES Blackbox：32MB Betaflight OSD: YES BEC: 5V 2.5A / 9V 2.5A Current sensor scale: 100 Inverter for SBUS input (UART2-RX) Smartaudio & Tramp VTX protocol supported Beeper pad : Yes RSSI input pad: No UARTs：5 Motor outputs: 8 8 pin 4in1 ESC port (GND, VBAT, M1, M2, M3, M4, CUR, R5) 6 pin DJI Air Unit port (R1, GND, R2, T2, GND, 9V) BLHeli32 Telemetry：RX5 Input voltage：recommended 2-6S, MAX 8S Firmware Target: IFLIGHT_F722_TWING Mounting pattern: 30.5*30.5mm φ4mm with Grommets φ3mm Dimensions: 36*36mm Weight: 7.5g USB type-C ESC // SucceX 50A Top Features: - 8 layers single-board stacking PCB board - 4oz 1.6mm thick power board - 32bit FO51K86 MCU, 48kHz maximum clock speed - TDK MLCC Low ESR ceramic capacitors - Top grade NTMFS5C430NL MOSFET Specification: MCU: STM32F051 Up tp 48kHz PWM frequency Capacitance: 470uF/50V Current Sensor: Yes Input: 2-6S LIPO Constant: 50A / Burst: 60A BlHeli32 telemetry: Yes BEC: No Supports up to Dshot1200, Proshot, Oneshot, Multishot Target: iFlight-BL32-4IN1 Weight:14.4g Mounting pattern: 30.5*30.5mm/Φ3mm Dimensions: 43*39mm (including the power pads) Package included: 1pc x SucceX-D F7 V2.1 TwinG Flight Controller 1pc x SucceX 50A 4in1

你可能感興趣的商品