Flysmart Digi

iFlight Nazgul Evoque F6 (6S DJI Digital)

Geometry

Receiver Option

Quantity

Summary

+ Specifications: - VTX: Vista w/ DJI Cam - Total Dimensions: 255.4mm (Squashed X) / 262.6mm (DeadCat) - Geometry: Squashed-X or DC (DeadCat) frame available - Bottom to top distance: 28mm - Arm Thickness: 6mm - Bottom plate thickness: 3mm - Top plate thickness: 3mm - Upper(middle) plate thickness: 3mm - XING2 2506 1500KV motors (LINK) - 6035 propellers - Weight: 464.3g (without battery and GoPro mount) FC // BLITZ MINI F7 Top Features: - BlackBox: 16MB - DJI Air Unit Plug-and-Play. No need to solder tiny wires. - BAT, +5V, 3.3, Start indicator - With LC filter. Specs: - MCU：STM32 F722 - Gyro：MPU6000 - Baro: NO - Betaflight OSD：IFLIGHT OSD （AT7456E) - Blackbox：16MB - 5 X Uarts - UART1 for VTX HD/Analog - UART2 for Receiver - UART3、UART4 for GPS or 0ther sensors that require a serial port - UART6 for ESC Telemetry - 4×Dshot/PWMoutputs - 1×I2C - 1xSH1.0 9pin connector for HD VTX/Analog VTX&CAM （5V/BAT/G/VO/T1/R1 /5V/G/VI） - 1 xSH1.0 8pin connector for ESC（R6/CUR/M4/M3/M2/M1/BAT/G) - 1xSH1.0 6pin connector for Any Receiver or DJI（3V3/R2i/5V /G/R2/T2） - 1xSH1.0 4Pin connector GPS (T4/R4/G/5V) - 1xSH1.0 4Pin connector LED&Beeper (BUZ/LED/G/5V) ESC // BLITZ Mini 55A (LINK) Specification: - Dimension: 35*42mm - Mounting Holes: 20*20mm/Φ4mm - Weight: 11.3g - Supports 2-6S lipo input - MCU：G071 - Constant: 55 Amps - Burst: 60 Amps - Current sensor: Yes - BEC: No - Current rate: 100 - Supports: DShot DShot150/300/600/MultiShot/ OneShot etc. - Firmware: BLHeli 32 - Target: IFLIGHT_BLITZ_G1

You might also like