Flysmart Digi

iFlight Nazgul 5 Evoque F5X/F5D (6S, Vista / DJI Cam)

Geometry

Receiver Option

Quantity

Summary

+ Specifications: - Total Dimensions: 136*190mm (body dimension) - Geometry: Squashed-X or DC (DeadCat) frame available - Bottom to top distance: 28mm - Arm Thickness: 6mm - Bottom plate thickness: 3mm - Top plate thickness: 3mm - Upper(middle) plate thickness: 3mm - XING2 2207 motors (4S/6S) (LINK) - Nazgul F5 propellers - Weight: 412g (without battery and GoPro mount) FC // BLITZ MINI F7 Top Features: - BlackBox: 16MB - DJI Air Unit Plug-and-Play. No need to solder tiny wires. - BAT, +5V, 3.3, Start indicator - With LC filter. Specs: - MCU: STM32 F722 - Gyro: MPU6000 - Baro: NO - Betaflight OSD: IFLIGHT OSD (AT7456E) - Blackbox: 16MB - 5 X Uarts - UART1 for VTX HD/Analog - UART2 for Receiver - UART3, UART4 for GPS or 0ther sensors that require a serial port - UART6 for ESC Telemetry - 4× Dshot/PWMoutputs - 1× I2C - 1 xSH1.0 9pin connector for HD VTX/Analog VTX&CAM (5V/BAT/G/VO/T1/R1 /5V/G/VI) - 1 xSH1.0 8pin connector for ESC(R6/CUR/M4/M3/M2/M1/BAT/G) - 1xSH1.0 6pin connector for Any Receiver or DJI(3V3/R2i/5V /G/R2/T2) - 1xSH1.0 4Pin connector GPS (T4/R4/G/5V) - 1xSH1.0 4Pin connector LED&Beeper (BUZ/LED/G/5V) - Smartaudio&IRCTramp VTX protocol supported - WS2812ledStrip: Yes - Bepper: Yes - Firmware: IFRC-IFLIGHT_BLITZ_F722 - Mounting: 20*20mm/φ4 - Dimensions: 30.5*27mm - Weight: 5.0g ESC // BLITZ Mini 55A Specification: - Dimension: 35*42mm - Mounting Holes: 20*20mm/Φ4mm - Weight: 11.3g - Supports 2-6S lipo input - MCU: G071 - Constant: 55 Amps - Burst: 60 Amps - Current sensor: Yes - BEC: No - Current rate: 100 - Supports: DShot DShot150/300/600/MultiShot/ OneShot etc. - Firmware: BLHeli 32 - Target: IFLIGHT_BLITZ_G1

You might also like