TransTEC F7 is a FC designed for purely flight. It remain all of you need for FPV, and strike out other thing not necessary. Bring the most stable Flight Controller.
The 2.54mm receiver pin layout can directly solder the CRSF/XM+... receiver on it, and the front T4/R4 solder pin can esaily use for camera OSD(Runcam) adjust function.
With the reverse ESC socket under the FC, it let the connector never broken from crash, and the front hollow design make the big place for camera angle at some small space frame.
Single plate design for easily install other device on the FC(CRSF Receiver/LemonRX/TBS Vtx).
TransTEC F7 also bulitin Vtx switch power, let you control the Vtx power on and off using radio switch. It make less interference in many situation like racing evnet, it also keep Vtx away from overheat.
Specifications:
IC : STM32F722
Gyro : MPU6000
BEC : 5V 4A
Battery input : 3-8S
Hole Size : 30.5 x 30.5
Screw Hole : M3
Weight : 7.8g
Betaflight Target : TRANSTECF7
Includes:
1x TransTEC F7 HD version Flight Controllet
5x Anti-vibration silicone grommets (for M3 sized screws)
2x 8pin JST-SH 1.0 connector
1set of 6/8/10 JST-SH connector
1x Micro USB anti-dust plug
