SpeedyBee F745 35A BLS 25.5x25.5 AIO Flight Controller

数量

简介

+

商品详情

Important Note:

Make sure the AIO's slightly bigger size can fit your own quad! The size of this AIO is 36.5(L)*36.5(W)*7.0(H)mm.
We suggest you use this AIO on your 3.5" to 5" cinewhoops/long-range or lightweight quads.For quads below 3.5",
you should carefully check if your quad has enough room for this AIO.

 

 

Specifications

Overview
Product NameSpeedyBee F745 35A BLS AIO
Power Input3S - 6S Lipo
Mounting25.5 x 25.5mm, 3mm hole diameter
Dimension36.5mm(L) x 36.5mm(W) x 7mm(H), recommended for quads at 3.5" or above
Weight10.1g
FC
MCUSTM32F745
IMU(Gyro)MPU6000
USB ConnectionNeed to solder a USB TYPE-C module to D+,D-,GND pads.
BarometerBMP280
OSDSupported
BLE BluetoothSupported. Used for parameter configuration
Flash FC Firmware WirelesslySupported
Download/Analyze BlackboxSupported
DJI Air Unit 6-pin ConnectorBuilt-in.
Flash(for BlackBox)8MB
Current SensorSupported. Scale=256
BetaFlight Camera Control PadYes(CC pad)
5V Output4 groups of 5V output. The total current load is 2.5A.
9V OutputNone
ESC Signal PadsM1 - M4
UARTFull UART * 4(UART1, UART2, UART3,UART4)
ESC Telemetry UARTNone
I2CSupported.
LED PadUsed for WS2812 LED
BuzzerBZ+ and BZ- pad used for 5V Buzzer
BOOT ButtonUsed to enter DFU mode
RSSI InputNot supported
SmartPortUse any TX pad of UART for the SmartPort feature.
Supported Flight ControllerBetaFlight(Default)
Firmware Target NameSPEEDYBEE F745AIO
ESC
Power Input3-6S LiPo
Continuous Current35A * 4
Burst Current45A(5seconds)
ESC ProtocolDSHOT300/600
Power OutputVBAT
Current SensorSupported(Sacle=256)
FirmwareBLHeli_S JH40

User Manual

你可能感兴趣的商品