Radiomaster AG01 Mini CNC Hall Gimbals for TX12 / Zorro (Pair)

Kuantiti

Ringkasan

+
Custom designed for the RadioMaster Zorro and TX12, these gimbals allow for unparalleled precision and stick feel. From the aviation-grade aluminum construction, non-contact hall sensors, and pre-installed Sticky360 Mini Gimbal Sticks, be prepared to revolutionize your compact radio experience!

Maklumat produk

AG01 mini CNC hall gimabls

Key Features

  • Made with CNC processed aviation grade aluminum.
  • Sticky360 Mini Gimbal Sticks as standard.
  • Non contact hall sensors for accurate control inputs and precise centering.
  • Quad precision bearings for unparalleled stick feel.
  • Adjustable vertical travel angle (Min. 38°, Max. 54°).
  • Custom designed for RadioMaster Zorro & TX12.

Specifications

  • Name: AG01 Mini CNC Hall Gimbal 
  • Sensor type: Hall Sensor
  • Working voltage: DC 3.3V
  • Linearity: Real-time (No delay)
  • Adjustable vertical travel range: 38°—54°
  • Self-centering adjustment : Yes 
  • Easy mode adjustment
  • Adjustable tension : Yes
  • Quad bearing: Yes
  • Temperature range: -20°C-85°C
  • Size: 49*42*48mm
  • Weight: 42g(±0.3g)

Review by Nick Burns

 

 

 

AG01 MINI Key Features

AG01 MINI CNC Hall Gimbals for TX12 & Zorro

AG01 MINI CNC Hall Gimbals for TX12 & Zorro AG01 MINI CNC Hall Gimbals for TX12 & Zorro AG01 MINI CNC Hall Gimbals for TX12 & Zorro AG01 MINI CNC Hall Gimbals for TX12 & Zorro AG01 MINI CNC Hall Gimbals for TX12 & Zorro

Installation for Zorro & TX12
 

The AG01 Mini gimbals are shipped as self-centering by default and are compatible with both the Zorro and TX12 Radios. 

FOR ZORRO

The Zorro radio is configured as Mode 1 or Mode 2 by the screws mounted in the rear case of the radio. Both gimbals should be installed in self-centering configuration (as default out of the box) in the Zorro radio. Once the radio is re-assembled the screws in the rear case of the Zorro will set the throttle gimbal.

FOR TX12
 

One gimbal must be set as throttle and one as self-centering before installation in the radio.
1. Use the included screw (see parts bag) to hold down the centering lever and set the gimbal as a throttle gimbal.
2. Adjust the throttle tension bar until the desired tension is achieved.

Size

AG01 MINI - Size

Package

  • 2 * AG01 Mini Hall CNC Gimbal
  • 2 * Hex tool
  • 8 * Installation screw
  • 2 * Spare normal tension spring
  • 2 * Throttle tension screw 

Anda mungkin juga berminat