PID temperature control: The soldering station adopts the advanced PID algorithm for temperature control, and the temperature rises quickly without losing the accuracy, no matter the size of the solder joints can be easily handled. Temperature enhancement: When the welding process encounters a large solder joint, the temperature of the soldering tip is temporarily increased, and then the normal temperature is restored to make the soldering smoother. Turn the knob to the right quickly in normal mode to turn this feature on.
Automatic sleep mode: Reduce temperature of the iron tip during idle, can extend the service life of the tip by up to 5 times, returns to previous temperature when handle is picked up.
Beep reminder: When the soldering station switches between various modes, the built-in buzzer emits different rhythm sounds. The user can master the operation of the soldering station without having to watch the screen.
OPERATION STEP
Normal use mode: In the power on state, the left and right rotation editor directly adjusts the temperature value (80-480 degrees Celsius)
Boost mode: Under normal use, press the encoder to enter the temperature boost mode (rapid temperature rise 50 degrees Celsius), the dot in the lower right corner of the digital tube flashes for 2-3 seconds until the set temperature enters the normal heating mode, the duration defaults. Default duration is 30 seconds.
Preset mode: Double click the encoder to enter preset selection mode, rotate the eocoder to select one of the preset values, which can be adjusted in Function setting mode, double click the encoder again to exit and return to Normal Mode.
Function setting mode: When the power is on, press the encoder for 1 second and then release, enter the parameter setting function, rotate the encoder to select the setting options: P01, P02, P03, click the encoder cycle function option. Press and hold the encoder button for 3 seconds, automatically save and exit the setting interface after a click.
