Matek F722-WPX Flight Controller

數量

簡介

+
STM32F722, MPU6000, DPS310, Pixel OSD, SD Blackbox, 10x PWM outputs, 6x UARTs, I2C, Camera switch FC Specifications MCU: 216MHz STM32F722RET6 IMU: MPU6000 (SPI) Baro: DPS310 (I2C) OSD: Pixel OSD/FrskyOSD (Uart6) Blackbox: MicroSD socket (SPI) 6x UARTs(5 Spare) with built-in inversion 1x Softserial_Tx option 10x PWM outputs 1x I2C 4x ADC (VBAT, Current, RSSI, AirSpeed) 1x SH1.0_6pin connector (4V5/G/TX4/RX4/SDA/SCL) for GPS/compass 1x SH1.0_6pin connector for external USB and buzzer Dual Camera Inputs switcher Vbat filtered power ON/OFF switcher PWM camera menu control: Not supported by INAV DJI FPV air unit: any spare UART Power 6~30V DC IN (2~6S LiPo) 132A high-precision Current Sense (Scale 250) PDB/Current sense resistor: 60A continuous, 132A burst. BEC 5V 2A for FC & Peripherals BEC Vx 5A for servos, 5V/ 6V option Vbat filtered output 1A for VTx and Camera LDO 3.3V 200mA Battery Voltage Sensor: 1:10 (Scale 1100) FC Firmware INAV target: MATEKF722WPX Physical Dimensions: 44 x 29 x 10 mm Mounting: 25 x 25mm, Φ2mm Weight: 20g w/ bottom plate and USB/buzzer adapter Including 1x FC F722-WPX 1x USB(Type-C)/Buzzer (Active) Adapter 1x Bottom plate, 44 x 29mm 2x JST-SH-6P to JST-SH-6P cables, 20cm 5x Brass standoffs, M2*4mm 10x screws, M2*3.5mm Dupont 2.54 pins (Board is shipped unsoldered)

你可能感興趣的商品