Ultralight 3 inch Cinewhoop for Professional FPV Pilots
For multi purpose shooting with comparable performance with a 5 inch quad.
Weight: 81.4g (Frame w/ Hardware)
Top/Bottom CF Thickness: 3mm
FC/VTX Mounting Pattern: 20x20 & 25.5x25.5mm (AIO FC ONLY)
Motor Mounting Pattern: 12mm M2
FPV Cam Sizes: 14/19/20mm
Battery Pad x2
Camera Mount x2
98A TPU 3DP GoPro Mount w/ M5 Hardware
Custom 7075 M2 Standoff x16
M3x6mm Bolt x2 for GoPro Mount
M2x8mm Bolt x32
M2x12mm Bolt x4 for FC
M2 Nyloc Nut x4 for FC
TPU VTX Mount x1
M2x20mm Bolt x4 for Vista
M2 Nut x4 for Vista
M1.6x14mm Bolt for O3 Air Unit
- When mounting FC board on the top board, use short dampers and insert battery strap first.
- When attaching the O3 air unit to the lower plate, use thin double sided tape to leave a gap with the baord, or cur the included M1.6 screws and attach it to the lower plate.
- Basic PID should fly well enough without vibration. If desired performance is not achieved, check FC board is well mounted and dampened, and motors are mounted securely.
Minchan Kim - MCK settings:
AIKON 45A AIO MPU6000 FC
MAD MCK 1507 2680KV
DOGCOM 1350mAh, GoPro Hero 11 Mini