Flysmart Digi

FETtec G4 FC 45A ESC Combo

Quantity

Summary

+ Features: - Latest STM32G4 Processor |- 170Mhz + Math accelerator |- MPU6000 - Supply voltage 6-27V (2S-6S Lipo) - 2x dedicated onboard BEC (max. 600mA each) |- 5V BEC for RX |- 5V/16V BEC for VTX (switchable and real Pit*) - 2x 8 pin connector for solder free ESC connection |- Connector 1: ESC signal 1-4, telemetry, VCC, GND |- Connector 2: ESC signal 5-8 (depending on UAV type 1-4), telemetry, VCC, GND - 1x 8 pin connector for solder free VTX, cam connection and OSD or digital systems |- real Pit* VCC, GND, Video in, Video out, BEC 5V/16V, VCS/TX3, RX3 - 2x 6 pin connectors for serials |- RX1, TX1, 3.3V, VCC, 5V, GND |- RX3, VCS/TX3, RGB LED, VCC, 5V, GND - 1x 4 pin connector for receiver |- Signal, TLM, 5V, GND - 5 UART serials |- UART 1 free |- UART 2 used for Receiver |- UART 3 free |- UART 4 used for onboard OSD, can be set free |- UART 5 used for ESCs / TLM / Onewire - 4 ESC solder pads (Signal/GND) in each corner - Buzzer pads - 4 tiny RGB LEDs (selectable color) - Supported ESC protocols |- PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire - FETtec KISS firmware - Onboard OSD |- Graphic OSD (STM32) |- Full KISS Tuning |-- Filter (PIDs, Rates, Settings) |-- LED control (RGB LED, Racewire) |-- VTX |-- Live data graphs (Voltage, motor rpm, current, motor temp, gyro values, link quality) |-- KISS GPS support + live map |-- Custom graphic pilot logo |-- Stick overlay |-- Custom layout |-- can be deactivated for usage of digital systems - Connector type: JST-SH-1mm *real Pit-Mode: A power supply pin which is remotely switchable - Maximum outside dimensions: 37,2 x 37,2mm, without outside tips 30 x 30mm - Mounting hole arrangement: - 20 x 20mm with M2 mounting hole (expandable to M3) - 30 x 30mm with M3 mounting hole - 30 x 30mm mounting hole tips are removable to reduce overall FC size - Overall height: 7,9mm - Weight: 5,37g Firmware: KISS Firmware FETtec OSD Firmware FETtec 4in1 ESC 45A Features: Active current limiting @ 45A Input voltage: 3S-6S High quality 40V MOSFETs STM32G071 @ 64MHz 128 kHz Motor PWM Full sine wave control Soldering holes for up to 5 additional capacitors KISS FC Passthrough Betaflight Passthrough (available in 4.1) Automatic input signal detection: - Dshot 300-2400 - PWM - OneShot 42/125 - OneWire BUS with up to 8kHz looptime (one cable for all Motorsignals and Telemetry) Dimensions: 38 mm x 38 mm Mounting hole: 30,5 mm x 30,5 mm, M3 expandable to M4 Firmware: New FETtec Firmware FETtec Configurator for updated, configuration and telemetry. Standalone for MacOS, Windows 32 & 64 bit and Chrome Plugin Scope of Delivery: FETtec ESC 4in1 45A Capacitor 50V, ESC < 1ohm (477CKE050M) JST-SH 8 Pin Cable Recommendation: For 6S batteries we recommand to use a FETtec Spike Absorber

You might also like