The 20A F405 AIO FC bright board thickness from 1.6mm to 1.2mm, which reduced the weight to 5.3g while improving the ability of the ESC to continuous current 20A. Now you can build a bigger quad with powerful FC to save weight and size such as the Beta95X Digital VTX, Beta95X V2 and Beta95X HD Digital VTX. What's more, this FC has upgraded to V3 version, the V3 board increases 2 Plug & Play Ports for both digital VTX and Rx, less solder work needed, easy to install.
Features:
- Updated the F411 chip to F405, this new board can handle 20A continuous current(22A burst), gives the pilots a powerful flight.
- Come with 2 integrated Plug & Play Ports for both digital VTX and Rx, less solder work needed, easy to install.
- Completed the traditional mounting hole, more like the Toothpick type, perfectly prevent the damping pad from falling off, which is the super-easy installation in most whoop frame.
- In addition, start with this board, BETAFPV will organize the serial port of 12A/20A FC as a unified format, all the same as this board, more convenient for the pilots' soldering work.
- Compatible with 110X, 120X, 140X motors, pilots can build a bigger quad with this powerful FC to save weight and size such as the Beta95X Digital VTX, Beta95X V2 and Beta95X HD Digital VTX.
Specifications of FC
CPU: STM32F405RGT6
Six-Axis: MPU6000
Size: 26mm x 26mm
Firmware version: Batefight-BETAFPV405-4.2.X
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
Receiver: Support Frsky XM/XM+ Receiver/ Futaba Receiver/ Flysky Receiver/ TBS Crossfire Receiver/DSMX Receiver
Support programmable LED like WS2812 etc
Built-in current sensor
Weight: 5.3g
Specifications of ESC
Support PWM，Oneshot125，Oneshot42， Multishot，Dshot150，Dshot300，Dshot600
Input voltage: 2S-4S Lipo
Continuous current: 20A
Peak current: 22A
Firmware: BLHELI-S G-H-25
Status LED
There are 2 LEDs on the bottom of the board to indicate the status, including the Power LED ( Red), FC LED(Blue).
Package
1 * F405 20A AIO 2-4S brushless flight controller V3
4 * M1.2x4mm screws
4 * M1.4x5mm screws
4 * Anti-vibration rubber dampers
1 * 6-Pin Connector for Digital VTX
1 * 4-Pin Connector for Rx
