Flysmart Digi

DIatone MAMBA Basic F722 MK3 55A BL32 128K FC Stack

Quantity

Summary

+ Add I2C function When you connect the USB, the receiver and OSD settings can be saved Increase the pad area LED signal selection (when Mamba Led sys avaiable) BEC short circuit protection TVS instant high voltage protection 30V Upgrade the anti-interference cable Add self-recovery insurance to the receiver's 5V power supply. Increase the camera VCC power supply pad. The standard flight controller (30.5×30.5) adds a spare pad. Gyro uses an independent Low Dropout Regulator (Low Dropout Regulator) and reduces ripple interference. FC Specifications MAMBA Basic F722MK3 MCU: 216MHz STM32F722RET6 GYRO: MPU Series Six-Axis Barometer: Yes OSD: Yes Blackbox: 16M Flash Memory Uarts: 6Set ESC Soft: Dshot300/600 ESC Telemetry: Yes Power Led: Yes LED Controller: BF LED/MB LED(4 Set 2812 LED) S/F.Port: Yes RSSI: Yes Buzz: Yes Input: 3~6S Lipo (12.6~25.2V) TVS Protection: Yes BEC:3.3V 0.5A& 5V 3A (System Power)& 5V 3A(LED)& 9V 3A MOUNTING: 30.5mm, M3 MAMBA 55A F55_128K INPUT VOLTAGE: 3~6S Lipo (12.6V~25.2V) CONTINUE CURRENT:50A×4 BURST CURRENT:60A (10S) BEC: No Target: BLHeli_32 MAMBA F55_128K SOFT: Dshot300/600/1200 TVS Protection: Yes MOUNTING: 30.5mm/M3

You might also like