Bullet Point
- Featuring the Z-Folding Process, it achieves a 5% energy density upgrade compared to the Winding Process, extending flight time and reducing battery replacement inconvenience.
- With a boosted discharge rate of 75C, it provides greater burst power for superior flight performance and maneuverability for unparalleled control.
- With an extended battery cycle life, it ensures prolonged power support, bringing users sustained and reliable performance.
- All-new LAVA Series Battery, featuring a new design that symbolizes explosive power akin to molten lava.
Specification
- Items: LAVA 2S/3S/4S 550mAh 75C Battery
- Capacity: 550mAh
- Dimension: 67*15.5*13.5mm(2S), 67*15.5*20mm(3S), 67*15.5*26mm(4S)
- Weight: 29.5g(2S), 43.2g(3S), 56.5g(4S)
- Power: 4.18Wh(2S), 6.27Wh(3S), 8.36Wh(4S)
- C-Rate: 75C
- Battery Type: LiHV
- Voltage: 7.6V(2S), 11.4V(3S), 15.2V(4S)
- Charge Plug: JST-XH2.54 Plug
- Connector: XT30 with 16AWG silicone wire
The below picture shows the discharge report of the 3S 550mAh 75C Battery.
Z-Folding Process
The Z-Folding Process Battery demonstrates remarkable performance and versatile capabilities. Leveraging its low internal resistance, it enables efficient high-current discharge within shorter time frames, resulting in elevated discharge platforms. Compared to the Winding Process Battery, it achieves a 0.2V higher discharge platform under equivalent loads, ensuring consistent and robust power output, additionally, it boasts a 5% higher energy density within the same volume, accompanied by an extended cycle life. The Z-Folding Process allows precise customization of electrode sizes based on lithium battery dimensions, optimizing control over battery size and shape. Its battery performance is superior, with a wider range of options for appearance and shape, and its applicability is also broader compared to the Winding Process Battery.
Warning
- Please fully charge the new battery before use.
- Only use a charger designed for lithium polymer/Li-ion battery, and never leave the battery unattended during the charging process.
- Always keep the battery away from flammable and explosive materials while charging.
- Never overcharge the battery. The maximum voltage for a LiPo battery is 4.2V per cell, and for a LiHV battery is 4.35V per cell.
- Never discharge the battery to a level below 3V per cell under load.
- Do not store fully charged batteries for more than 3 days. For long-term storage, maintain the voltage between 3.8V and 3.9V.
- Do not disassemble, crush, short circuit, or expose to flame or other sources of ignition.
- Do not use batteries that are deformed or swollen.
