Flysmart Digi

BetaFPV ELRS 2.4 Lite Receiver (Tower Antenna)

數量

簡介

+ Specification Weight: 0.47g (with SMD ceramic antenna) Size: 10mm*10mm Telemetry power: 17mW Frequency bands (Nano receiver 2.4G version): 2.4GHz ISM Input voltage: 5V Antenna: Integrated SMD ceramic antenna Configuration & Bind ExpressLRS uses the Crossfire serial protocol (AKA CRSF protocol) to communicate between the receiver and the flight controller board. So make sure your flight controller board supports the CRSF serial protocol. Next, we use the flight controller with Betaflight firmware to show how to set up the CRSF protocol. On the "Configuration" tab, select "Serial-based receiver" on the "Receiver" panel, and select "CRSF" as the protocol. Telemetry is optional here and will reduce your stick update rate due to those transmit slots being used for telemetry. The Lite receiver comes with offically major release V1.1.0 protocol and no Binding Phrase inlcuded. Lite receiver could enter binding status by power on/off three times. Plugin and unplug Lite receiver three times; Make sure the LED is doing a quick double blink, which indicates the receiver is in bind mode; Make sure the RF TX module or radio transmitter enter binding status, which sends out a binding pulse; If the receiver has a solid light, it's bound.

你可能感興趣的商品