Flysmart Digi

Beta Meteor 75 BNF

METEOR 75

數量

簡介

+ Bullet Point Meteor75 is the first generation whoop powered by brand-new BT2.0 connector 450mAh battery. The BT2.0 connector effectively decreases internal connector resistance for a much better discharge performance compare with initial PH2.0 connector The power system uses the latest 1102 18000KV motors and 40mm 3-blade props, which provides pilots stronger experience of a powerful indoor and outdoor flight 1102-18000KV motors paired with durable ball bearings for increasing flight time/performance and low maintenance, while it adopts PCB connector to allow you repair it easier once it's disconnected Flight controller pre-soldered the BT2.0 cable, which can provide more stable and powerful 9A continuous current Comes with an injection molding canopy, more durable and weighs only 1.5g The package comes with BT2.0 450mAh 1S lipo and BT2.0-PH2.0 adapter cable. The adapter cable is convenient for charging BT2.0 battery with your stock PH2.0 charger. Meanwhile, we have also released BT2.0 Lipo Charger Board to charge 6pcs battery at the same time Specification FC&ESC: F4 1-2S AIO Brushless FC Frame: Beta75 Pro 2 Whoop Frame Motors: 1102 18000KV motor Props: 40mm 3-Blade Propellers (1.5mm Shaft) VTX&Camera: M01 AIO Camera VTX Receiver Option: Frsky XM / DSMX / Futaba S-FHSS / TBS Crossfire Battery: BT2.0 450mAh 1S 30C Battery Flight time: 3-4min Weight: 28.7g (without battery) Flight Controller We use the classical F4 1-2S AIO Brushless FC on Meteor75 drone. Why not the lighter F4 1S AIO Brushless FC board? The burst current of the Meteor75 could up to 15A even on 1S power. Only the F4 1-2S FC board could hold so high current in continue flying. Of course, the 1g difference in weight is no sensitive to such a beast drone. This AIO F4 FC is suitable for a light 1-2S whoop drone perfectly, Integrated with a Betaflight F411 processor FC, Betaflight OSD, SPI Frsky receiver and 1-2S 5A ESC. SPECIFICATIONS OF FC & ESC CPU: STM32F411 Six-Axis: MPU6000 Built-in 1-2S ESC with 5A continuous and peak 6A current Support BLHeliSuite programmable Factory firmware: S_H_50_REV16_7.HEX Injection Molded Canopy Since Meteor75 whoop drone, we will use an injection molded canopy, which is only 1.5g with camera holder. Of course, much durable than the original canopy. M01 AIO Camera VTX- The unit is ultra-lightweight only 3g, perfect for Meteor75. It comes with a super Mini 5.8GHz FPV Transmitter + 600TVL FPV Camera + RG178 Antenna, features 6 bands and 37 channels on the 5.8GHz band with Raceband.

你可能感興趣的商品